2021 PowerPro 205Si 200AMP ACDC TIG ARC PULSE WELDER 50a plasma cutter EVERLAST

Description

Power i-TIG 200T
310 579 2075
Home
About Us
Contact Us
Shop Policies
FAQ
Feedback
Store categories
DC TIG Welders
ACDC TIG Welders
MIG Welders
Stick Welders
DC Combo
ACDC Combo
MTS Combo
Coolers
Accessories
Plasma Cutters
Generators
SKU: PP205SI-NOVA
Product Description
Looking for a good all around welder with some extra features? The IGBT inverter-based PowerPRO 205S from Everlast is designed to be just that unit. With 200 amp TIG, 160 amp Stick and 50 amp Plasma cutter capabilities, the unit is an all-in-one solution that is useful in many situations where space and portability are key concerns. The flexibility and versatility that the multi-process PowerPro 205S offers is hard to beat. Stable arc performance helps both hobbyists and professionals to make quality repairs in about any situation. The pulse capability further extends the unit's capabilites, as well as the fully adjustable AC Frequency and AC balance while operating in TIG mode. The PowerPRO multi-units are definitely the utility players in Everlast's lineup and are ready to go to work anywhere they are needed
PRODUCT EXTRAS
Features & Benefits:
All-in-one portability
Compact IGBT Inverter design and low power consumption is ideal for portable use
Compact, yet powerful TIG welding/Plasma cutting features
Easy to use controls with simple selector switch for process changeover
Quick change out of torches for easy change from TIG to plasma back to TIG
Good duty cycle ratings for TIG, Stick, and Plasma
Duty Cycle indicator warns when thermal threshold has been exceeded and interrupts welding/cutting output until condition is resolved
Over Current indicator warns when duty cycle has been exceeded and interrupts welding/cutting output until condition is resolved
OK to cut indicator lights up when air pressure meets minimum required operating pressure and interrupts cutting output when air pressure is too low
Low dross cuts on steel up to 5/8" with up to 7/8" maximum capacity (under ideal conditions)
Exceptional arc stability for TIG/Stick functions
WHAT'S INCLUDED
Standard Equipment:
12ft. Everlast 26-Series air-cooled TIG torch with DINSE-style 35 series connector
Stick electrode holder with 10 ft cable and DINSE-style 35 series connector
12ft. Everlast S-45 Plasma torch with DINSE-style 35 series connector
Work clamp with 10 ft. cable and DINSE-style 25 series connector
Foot pedal
Argon regulator for TIG
Air Pressure regulator with water trap/filter (Note: This is not an air dryer. A separate, inline air dryer, supplied by the customer should be installed)
Consumable starter kit for TIG and Plasma (Does not include TIG tungsten)
OPTION
Optional Equipment:
25 ft. Everlast air-cooled Series 9F flex neck TIG torch for delicate, lower amp work
25 ft. Everlast water-cooled Series 20F flex neck TIG torch for higher amperage work
12.5 ft. C-K Trimline air cooled flexneck 26 with superflex cable, safe-loc connector, and stubby gas lens kit (recommended)
12.5 ft. C-K FL 150 Flex-loc air cooled torch with superflex cable, safe-loc connector, and stubby gas lens kit
12.5 ft C-K FL 250 Flex-loc water-cooled torch with superflex cable, safe-loc connector, and stubby gas lens kit
Water-cooler for watercooled torches
Welding cart
RECOMMENDED USES
Recommended Areas of Use:
Farm/Ranch where portable repairs are needed and carrying multiple units is not an option
Motorsports/At the track/Offroad where quick repairs are often needed
For businesses that often need spot repairs and one-off projects completed
Recommended Metals:
Steel
Stainless
Aluminum
Titanium
Virtually any weldable metal
TECH SPECS
NOTES
Product Notes:
A separate Air Dyer must be used inline while plasma cutting.
To change from TIG to Plasma operation, both the input gas supply, regulator and the torches must be swapped over. Only one torch can be connected at any given time.
Remember: The TIG and plasma torch are always connected to the negative terminal. Generally, the Stick holder is connected to the positive terminal for most welding electrodes.
NOTE: For use with generators, this welder requires a MINIMUM of 10,000 watts of continuous output and be designated as "clean power" by the generator manufacturer. For best results, a higher output generator may be required. Use with generators not designated by the generator manufacturer as a "clean" power source may void warranty.
MINIMUM/MAXIMUM
Minimum/Maximum:
TIG single pass capability
Steel: 36 ga. - 3/8"
Aluminum: 24 ga. - 1/4"
Stick electrode diameter capability:
1/16"-1/8"
Plasma Cutting capability* ( with dry air, new consumables, proper air pressure etc.)
up to 1/2" daily use @ 15-20 ipm
up to 5/8" clean cut @ 8-12 ipm
up to 3/4" severance cut @ 3-5 ipm
*Quality and capacity of cut depends upon consumable orifice size, standoff height, travel speed, etc.
Returns
For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately.
DOA items: In the event you receive a non working unit , we will exchange it free of charge.
Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost.
Shipping Information:
1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines.
2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon as possible.
3- Please provide a physical address. We will not ship to a PO Box.
4- Shipping charges are for the (48) Continental United States only.
5- We don’t ship to Canada
6- We charge CA tax on all orders 9.5%
7- If you pay via PayPal, shipping will be to your confirmed address only
8- Shipping to AK, HI and PR is more. please email for price.
Contact
Operating Hours:
Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)