Fronius TransSteel 2700 Welder

Description

This brand new Fronius TransSteel 2700 is ready for use in just three steps: select the wire, wire diameter and gas and start welding. You can switch between the individual welding processes in 60 seconds. In addition, the TransSteel can be used as a single-phase device up to 220A (TIG).
Welding current max.
270 A
Welding current min.
10 A
Welding current / Duty cycle [10min/40°C]
270A 30% MIG/MAG, MMA, TIG
Welding current / Duty cycle [10min/40°C]
210A 60% MIG/MAG, MMA, TIG
Welding current / Duty cycle [10min/40°C]
170A 100% MIG/MAG, MMA, TIG
Operating voltage
14,5-27,5V MIG/MAG, 20,4-30,8V MMA, 10,4-20,8V TIG
Open-circuit voltage
85 V
Mains frequency
50-60Hz
Mains voltage
3 x 380V / 400V / 460V
Mains fuse
16A
Dimension / b
276 mm
Dimension / l
687 mm
Weight
29,7 kg
Degree of protection
IP23
TransSteel 2700 270A Welding Power Source
MTG 320i MIG Gun, 15 ft
Ground Clamp, 13 ft
.030" / .035" Steel Consumable Setup
U-Groove .030" & .035" Drive Rolls
Flow Meter w/ Gas Adapter