Gecko Aeware IN.XE swim spa pack control unit with 4kW heater part# 0602-221063

Description

MONTRÉAL SPA DEPOT
Welcomes you !
Please visit my boutique for all Gecko Electronics, Balboa WG®, Waterway & Aqua-Flo pumps original OEM warranty products needs for your spa, hot tub or bath tube
http://stores.cafr.ebay.ca/montrealspadepot
This "item" is for:
Spa pack IN.XE 120/240V 60Hz (North America)
HEAT.WAV heater 4kw (
1kw @ 120V
)
Gecko part# 0602-221063-299
Replaces 0602-221022 /
This model DO NOT support pump#2 at 2-speed
This model support SWIM SPA configuration both for Master & Slave unit
For CE version 230V 50Hz (Europe), see in my store
For complete bundle kit with In.Link cables & Topside control panel, see in my store
in.xe
innovative entry level spa pack platform
The perfect control system for entry level spas. In.xe combines Aeware by Gecko's in.pac series breakthrough features and signature design with a heat.wav integrated heater in optimal price/performance configurations for typical entry level spas (dual pumps, dual pumps & blower, single pump or single pump & blower with key accessories).
The perfect system for entry level spas
with Aeware by Gecko's breakthrough features and signature design!
Available simultaneously in UL and CE versions, in.xe is the newest addition to the best and most advanced spa systems and accessories in the spa and hot tub industry. Our new and innovative in.xe spa pack platform is really compelling.
In.xe's design focuses on features and functions that appeal to every player in the industry, from the spa manufacturer decision maker to the end user. Built to take full advantage of Aeware by Gecko's advanced electronics, in.xe caters to reason as well as emotions, conveying a definite statement of reliability, safety and ease-of-use.
Like in.xm, its bigger brother, in.xe is sturdy, compact and thin. Its small footprint makes it a perfect fit in any crowded spa equipment compartment. Its dimensions respond to industry expectations for packs designed for entry-level spas and hot tubs. It can be installed on the floor with a bracket securing its position or be wall-mounted.
innovative entry level spa pack platform
In.xe ground-breaking features
for unsurpassed innovation, reliability and safety
Like in.xm, in.xe offers an impressive list of technical features. Each of them stands on its own merits and contributes to bring to all players in the industry the most advanced solutions for entry level spas and hot tubs ever offered to them.
in.put
new input terminal bloc
In.xe's cable bay was designed to ease wire insertion. Its terminal bloc has more room to insert wires. Tighter input connection reduces heat generated for increased component lifetime.
in.axess
board access prevention
Only serviceable parts, terminal bloc, fuses, heater and probe connectors, are made accessible to service technicians. Electronic components are protected in separate and inaccessible compartments.
in.seal
watertight protection
In.seal provides extra level of protection against water infiltration. Connectors and power box are designed to be watertight and no water can be in direct contact with electrical components. (IPX5)
in.link
plugs and connectors
Totally waterproof,
in.link
plugs and connectors are designed to ensure that all cables of equipment used to make a spa work properly are well connected at their intended connection port, eliminating any risk of mis-wiring.
in.flo
solid state monitoring
In.flo is an all-electronic dry-fire protection of in.xe's heat.wav heater. In.flo eliminates the burden of adjustments, calibrations and failures associated to usual water flow sensors.
in.kin
kinetic heat monitoring
In.xe design includes kinetic heat monitoring through in.kin, a contactor that protects spas and spa users against water overheat. In.kin is the industry's first and only true kinetic heat protection. It monitors all pump outputs, not just the "heating" pump.
in.t.cip
water temp. algorithm
In.xe also monitors water temperature through in.t.cip, our breakthrough software algorithm that calculates optimal time to start pumps and get water temperature readings.
in.stik
Spa system configurator
In.stik is one of in.xe's coolest features, a pen drive like spa system configurator merged with an in.link connector. In.stik connects to in.xe and contains software to program or configure its system. In.xe executes the data upload and update automatically.
In.xe takes full advantage of Aeware by Gecko's
advanced electronics and water resistance
heat.wav
high performance heaters
In.xe comes with a high performance heat.wav heater. With no pressure switch, it features in.flo integrated dry-fire protection. Shipped in a 240v / 4 kW configuration, in.xe's heat.wav heater can be easily converted to dedicated 120v / 1kW by a simple switch of a cable connection port performed on production lines, in dealer showrooms or in the field.
A watertight panel protects the heater and probe connectors. Removing the panel gives access to in.flo dry-fire protection and hi-limit/regulation probe connectors, Line 1, Line 2 and ground power input cables connection ports.
heat.wav specifications summary :
17 A resistive (4kW @ 240v)
8.7 A resistive (2kW @ 230v)
8.5 A resistive (1kW @ 120v)
Supports 120v or 240v
Protected by external breaker (not fused)
Heater element is Incoloy® for greater protection against corrosion
in.k200
Compact keypad for in.xe spa systems
In.xe comes with in.k200, a brand new keypad that offers all the cool features of in.keys series top side controls like clean interface, big and crisp characters on its display, true tactile feel and sleek elegance.
In.k200 has a waterproof plastic enclosure and can command spas equipped with single or dual pumps, with or without a blower and a mood light. With its thin design and its low profile, in.k200 can easily find its place on the edge of any spa. In.k200 comes with an in.link connector, brackets and adhesive. Its full- surface overlay can be customized.
innovative entry level spa pack platform
Main features and specification summary
Main feature summary:
in.put
new input terminal bloc
In.xe's cable bay was designed to ease wire insertion. Its terminal bloc has more room to insert wires. Tighter input connection reduces heat generated for increased component lifetime.
in.axess
board access prevention
Only serviceable parts, terminal bloc, fuses, heater and probe connectors, are made accessible to service technicians. Electronic components are protected in separate and inaccessible compartments.
in.seal
watertight protection
In.seal provides extra level of protection against water infiltration. Connectors and power box are designed to be watertight and no water can be in direct contact with electrical components. (IPX5)
in.link
plugs and connectors
Totally waterproof,
in.link
plugs and connectors are designed to ensure that all cables of equipment used to make a spa work properly are well connected at their intended connection port, eliminating any risk of mis-wiring.
in.flo
solid state monitoring
In.flo is an all-electronic dry-fire protection of in.xe's heat.wav heater. In.flo eliminates the burden of adjustments, calibrations and failures associated to usual water flow sensors.
in.kin
kinetic heat monitoring
In.xe design includes in.kin, a contactor that protects spas and spa users against water overheat. In.kin is the industry's first and only true kinetic heat protection because it monitors all pump outputs, not just the "heating" pump.
in.t.cip
water temp. algorithm
In.xe also monitors water temperature through in.t.cip, our breakthrough software algorithm that calculates optimal time to start pumps and get water temperature readings.
in.stik
software auto-uploader
In.stik is another cool in.xe feature, a pen drive software auto-uploader with an in.link connector. In.stik connects to in.xe and contains software to program or configure its system. In.xe executes the data upload and update automatically.
All Xserie (IN.XM2 & IN.XE) spa packs
support the in.touch WiFi module interface
,
allowing you to use your favorite iOS & Android-base devices to communicate with your spa.
(not included, see in my store
)
Compatible with ALL Aeware keypads:
in.k600 Static main keypad
LCD display. 11 keys, 14 function icons.
in.k4 & in.k45 keypad
LCD display, 8 keys, 10 function icons
in.k8 keypad
LCD display, 8 keys, 6 function icons.
in.k35 main keypad
LCD display, 6 keys, 8 function light indicators
in.k200 main keypad
LCD display, 4 keys, 7 function light indicators.
in.k450 main keypad
LCD display, 7 keys, 10 function icons
in.k800 main keypad color LCD display, 10 keys
in.k500 main keypad Color LCD display, 7 keys
in.k300 main keypad LCD display, 4 keys
new full featured in.k1000 keypad with color capacitive
touch screen
display
Specifications review:
in.xe UL/CSA electrical specifications
Input rating:
Or:
120/240 VAC nominal (+ 5/- 10 %)
(2 lines required with neutral) 48 A Max,
120 VAC nominal only (+ 5/- 10%)
single line with neutral) 16 A Max,
60Hz nominal (+ 1. 5 / -1.0 Hz).
Output ratings:
Output
Out 1
Out 2
Out 3
Out 4
Out 5
L1
CO
C1
Voltage
120/240V
120/240V
240V
120/240V
120/240V
120/240V
12VAC
Maximum Current
20 FLA/70 LRA (in-rush)
15 FLA/60 LRA (in-rush)
15 FLA/60 LRA (in-rush)
10 A
6 FLA/10 A
10 A (always ON)
1 A
Typical Device
Pump 1 High Speed
Pump 1 Low Speed
Pump 2
(CP)/Blower
Ozone Generator
Audio/Video device
Light
Communications port (in.stik)
Tub side controller
heat.wav ratings:
Voltage:
Current:
Flow rate:
120 or 240 VAC, 60 Hz
17A resistive (4 kW at 240V)
8.5 A resistive (1kW at 120v)
Minimum of 18 GPM is required
in.xe.ce TUV electrical specifications
Input rating:
Or:
230/400 VAC nominal (+ 5/- 10 %)
(2-phase system) 20 A Max per phase
230 VAC nominal (+ 5/- 10 %)
(single-phase system) 40 A Max
50 Hz nominal (+ 1. 5 / -1.0 Hz)
Output ratings:
Output
Out 1
Out 2
Out 3
Out 4
Out 5
L1
CO
C1
Voltage
230V
230V
230V
230V
230V
12VAC
Maximum Current
15 FLA/60 LRA (in-rush)
15 FLA/60 LRA (in-rush)
6 FLA/10 A
6 FLA/10 A
10 A (always ON)
1 A
Typical Device
Pump 1 Hi & Low
Pump 2
(CP)/Blower
Ozone Generator
Audio/Video device
Light
Communications port (in.stik)
Tub side controller
heat.wav ratings:
Voltage:
Current:
Flow rate:
230 VAC, 50 Hz
8.7 A resistive (2kW at 230v)
5.7 A resistive (1.3 kW at 230v)
16.5 A resistive (3.8 kW at 230v)
Minimum of 18 GPM is required
Environmental:
Operating temperature (*)
North American model in.xe:
0°C (32°F) to 60°C (140°F) for Pump 1 up to 15 A
0°C (32°F) to 50°C (122°F) for Pump 1 up to 20 A
European model in.xe.ce:
for single-phase system (32 A Max) or 2-phase (2 x 16 A)
0°C (32°F) to 60°C (140°F)
for single-phase system (40 A Max) or 2-phase (2 x 20 A)
0°C (32°F) to 50°C (122°F)
(*Controller must be installed under the spa skirt)
Storage temperature: -25°C (-13°F) to 85°C (185°F)
Humidity: up to 85% RH, non condensing
Mechanical:
Weight: 4.76 kg (10.5 lbs)
Dimensions (W x H x D):
Chassis: 441.5x298.5 x129 mm (17.38" x 11.75" x 5.1")
UL/CSA Standards:
UL 1563 Fifth Ed.
UL File: E182156
CSA No. 22.2 - 218.1-M89.
TUV Standards:
EN/IEC 60335 - 2 - 60: 2003/2002 - EN/IEC 60335 - 1: 2002/2001
(incl. Corr. & Am. up to 2004)
EN55014-1
EN55014-2
EN61000-3-2
EN61000-3-3
The in.xe.ce is lab tested to IPx5 enclosure protection levels.
Keypads available for the in.xe:
in.k200 (LED display, 4 keys, 7 light indicators)
in.k219 (LED display, 4 keys, 7 function icons)
in.k235 (LED display, 6 keys, 8 function icons)
in.k400 (LCD display, 6 keys, 10 function icons)
in.k450 (LCD display, 6 keys, 10 function icons)
Interface connections:
communication link (in.stick or in.watch)
----------------------------------------------------
This "item" is for:
Spa pack IN.XE 120/240V 60Hz (North America)
HEAT.WAV heater 4kw (
1kw @ 120V
)
Gecko part# 0602-221063-299
This model
DO NOT support pump#2 at 2-speed
This model
support SWIM SPA configuration both for Master & Slave unit
For CE version 230V 50Hz (Europe), see in my boutique
For complete bundle kit with In.Link cables & Topside control panel, see in my boutique
COMPLETE OEM PRODUCT FROM GECKO DIRECTLY.
Made in Canada, Autorized Gecko's reseller, Brand new objects. Factory seal.
Come with 2 years of manufacturer warranty.
Retail: 869.99$ + tx
Real cost shipping rates (insured 100%) with shipping calculator 18" x 14" x 8" inches.  Weight:  10 lbs.  (45x35x20 cm -- 4.54kg)
CANADA:  by CanadaPost
Expedited 1-7days
Standard 3-9days
Xpresspost 1-4 days, all trackables
USA:  CanadaPost&USPS
Expedited parcel USA 4-8 days, with tracking#
Xpresspost USA 2-4 days with tracking#
INTERNATIONAL:
CanadaPost + your local Postal services
International surface/boat parcel -  4 to 7 WEEKS, with tracking#
Xpresspost International - EMS - 4-10 days, with tracking
Airmail parcel - EMS - 6 to 20 days, with tracking