NEW LightningMTS 225 200 Amp AC/DC Pulse TIG / MIG / Stick Combo 110v/220v

Description

Power i-TIG 200T
Home
About Us
Contact Us
Shop Policies
FAQ
Feedback
SKU:
LMTS-225
Product Description
Along with its big brother, the Lightning MTS 275, the Lightning MTS 225 is the latest in the heavy-duty MIG/TIG/STICK series to feature AC/DC TIG welding capability.  This new series of features revised synergic function now called "Power Set" and now includes auto set parameters for all three modes.   The  LIghting MTS 225 is a 200 Amp unit that excels not only in features, it also excels with performance.  The new design allows the user to view most all relevant settings simulaneously.  This reduces scrolling effort and allows near instantaneous adjustment of all common parameters in use.  The new PowerSET function allows the customer to enter basic operating parameters in MIG, TIG, or Stick mode, and automatically selects the proper Amps and Volts (where applicable) for the user, as well as a few other possible adjustments.  This new unit also features a Flux-Core mode for operation with most common types of Flux Core wire (without gas/self shielding).   As powerful as the welder is, it is also capable of operating on 120V if the unit needs to be carried to the work. Of course, you'll have reduced output, but you will not suffer for lack of available duty cycle.   As far as operating duty cycle at full-tilt output, TIG and Stick feature 60% output and MIG features 35% at maximum amperage for the Process. That means, for MIG, at 200 Amps, you'll have 35% duty cycle available.   Add the
PowerCart 250
and the
PowerCool W300
for a convenient, stacked design to complete this welder.  If you choose the cooler option, be sure to order the water-cooled torch package for this welder.
PRODUCT FEATURES
Exclusive!  MIG, AC/DC Pulse TIG, and Stick design.
New!
Power-Set function features synergic function of all processes.
High Frequency and Lift Start AC and DC TIG modes for a true "all in one" design
Digitally controlled operation in all modes improve control and dependability.
Operator friendly panel without complicated hidden menus or adjustments with grouped controls.
Manual Override of PowerSet function allows the user to adjust items like pre-flow/post-post flow/slope etc.
Weld Aluminum, Stainless, or Steel with the MIG function with wire diameter from .023- .030" (additional driver roll sizes and types available up to .045" as option).
Save up to 16 different programs with memory function that provides easy saving and recall of your favorite settings.
Synergic Spool gun operation capability with optional spool gun. Ideal for welding aluminum.
TIG torch and Foot pedal included for TIG. Regulator included.
Built in gas solenoid and connections for TIG eliminates need for gas valve torch used by competitors
True DC CC/CV Multi-Process design eliminates needing or carrying multiple units for one job.
AC capability on TIG allows user to weld aluminum. Industry first for this type design.
Pulse TIG capability increases control and weld quality.
Compact and light weight design makes the unit extremely portable, ideal for on-site fabrication.
Adjustable Burn-back control keeps the wire energized after wire has stopped feeding to allow the wire to melt back to a desired length without retrimming wire before restarts.
8"  Diameter wire spool capacity maintains portability while maintaining productivity.
Adjustable MIG Wave arc force control manages slope/ inductance and fine tunes arc characteristics.
Adjustable stick Arc Force and New Hot Start controls allows the user to dial in desired Stick welding performance.
TIG Up and Down slope allows the user to control the end of the welding cycle.
2T/4T torch trigger/latch function offers stepped control welding with TIG and MIG.
Adjustable Pre and Post flow for TIG and MIG operation improves over all weld quality.
200 Amps of MIG and TIG power offer more than enough power to get the job done. 160 amps of stick welding power can be used with up to 1/8" welding rods.
Dual Voltage design will operate on 120V or 240V.  Output on 120V is limited to 125 amps MIG/TIG/ 100 amps Stick.
WHAT'S INCLUDED
Standard Equipment:
12 ft. Everlast 26 Series TIG torch with series 35  DINSE-style connector
10 ft. Series 15 MIG torch with Euro style quick connect fitting
Stick electrode holder with 10 ft. cable and 35 series DINSE-style connector
Work clamp with cable 10 ft. cable and 35 series DINSE-style connector
Spare consumable starter kit (does not include tungsten)
Foot Pedal
Argon Regulator
OPTION
Optional Equipment:
Spool gun with 25 ft. cable and Euro quick connect fitting
Flux Core drive rolls/extended drive roll sizes for MIG
Welding cart
Consumable kits
NOVA Rota-Flex series TIG torches available in 9, 17, 20 AND 18 sizes with ultra-flex silicone
Everlast 9F series flex head TIG torch with flex cables and 35 series DINSE style connector
NOVA long life foot pedal
RECOMMENDED USES
Recommended Areas of Use:
Portable Repair On Road or Off Road
Automotive garages/Muffler Shops
Motor Sports Facilities
Construction sites
HVAC
Factory Maintenance
Research/Education
Fabrication shops
Recommended Metals:
TIG:
Steel
Aluminum
Stainless
Chrome Moly
Titanium
Copper
MIG:
Steel
Stainless
Chrome Moly
Aluminum (Spool Gun)
Stick:
Steel
Stainless
Chrome Moly
Aluminum
TECH SPECS
Type:
Digital/Micro-controlled IGBT Inverter
Output /Process Type:
MIG, DC TIG, DC Stick
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated MIG Amps:
120V @ 125A
240V @ 200A
Max Rated TIG Amps:
120V @ 125A
240V @ 200A
Max Rated Stick Amps:
120V @ 100A
240V @ 160A
MIG Amps/Volts @ Rated Duty Cycle:
120V:
125A/21.5V @ 35% Duty Cycle/40º C
240V:
200A/24V @ 35% Duty Cycle/40º C
TIG Output Amps/Volts @ Rated Duty Cycle:
120V:
125A/14.8V @ 60% Duty Cycle/40º C
240V:
200A/18V @ 60% Duty Cycle/40º C
Stick Amps/Volts @ Rated Duty Cycle:
120V:
100A/24V @ 60% Duty Cycle/ 40º C
240V:
160A/26.4V @ 60%  Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps:
@120V: 28A
@240V: 26A
Maximum Rated (I1EFF ) Input Amps:
@120V: 17A
@240V: 18A
OCV:
MIG:  74V
TIG:  74V
Stick:  74V
MIG Output Range:
120V: 30-125A/15.5V-20.3V
240V: 30A-200A/15.5V-24V
TIG Output Range :
10A-200A/15.5V-26.5V
This unit is AC and DC capable
(High Frequency or Lift Start operation)
Stick Output Range:
120V:
10-100A/20.4V-24.8V
240V:
10A-160A/20.4V-26.4V
Variable MIG Inductance/Stick Arc Force Control:
Yes
Spool Gun Capable:
Yes
Pulse Frequency:
TIG .5-150Hz
Pulse Time On:
TIG: 5-95%
Pulse Volts:
5-95% of TIG Amps
Standard Drive Roll wire size:
.023”-.030”
Separate wire feeder:
No, self contained
Number of Drive rollers:
2
Max Wire Feed Speed:
120V:  400 IPM
240C: 600IPM
Max Wire Roll Diameter:
8” (up to 12 lb)
Memory:
Yes
Upslope Time:
0- 5 Seconds
Down Slope Time:
0-5 Seconds
Preflow time:
0-5 Seconds
Post Flow Time:
0-10 Seconds
Foot Pedal:
Standard
Flux Core:
Yes, Optional
Air Carbon Arc:
No
2T/4T /Torch latch/Trigger:
Yes
NOTES
Adjustable Burn-back control keeps the wire energized after wire has stopped feeding to allow the wire to melt back to a desired length without retrimming wire before restarts. | 8" Diameter wire spool capacity maintains portability while maintaining productivity. | Adjustable MIG Wave arc force control manages slope/ inductance and fine tunes arc characteristics.
MINIMUM/MAXIMUM
MIG:
Weld up to a maximum of 3/8"  single pass* (240V)
Weld up to a maximum of 5/8" multi-pass (240V)
Weld  a minimum of 24 gauge (120V, 240V)
Weld a maximum of 3/16" single pass* (120V operation)
* Single pass welds greater than 1/4" are not recommended as a sound welding technique.
TIG:
Weld steel to a maximum of 5/16" single pass (240V)
Weld steel to a maximum of 1/4" single pass (120V)
Weld steel to a maximum of 1/2-5/8" multi-pass(240V)
Weld steel to a maximum of 3/8" multi-pass (120V)
Weld aluminum to a maximum of 1/4" single pass (240V)
Weld aluminum to a maximum of 1/8" single pass (120V)
Weld aluminum to a maximum of 3/8" multi-pass (240V)
Weld aluminum to a maximum of 1/4" multi-pass (120V)
Weld to a minimum of .007" Steel
Weld to a minimum of .020" Aluminum
Stick
Weld with a maximum of 1/8" diameter electrode (240V)
Weld with a minimum of 1/16" diameter electrode (120V and 240V)
Weld with a maximum of 3/32 diameter electrode (120V)
Returns
For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately.
DOA items: In the event you receive a non working unit , we will exchange it free of charge.
Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost.
Shipping Information:
1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines.
2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon as possible.
3- Please provide a physical address. We will not ship to a PO Box.
4- Shipping charges are for the (48) Continental United States only.
5- We don’t ship to Canada
6- We charge CA tax on all orders 9.5%
7- If you pay via PayPal, shipping will be to your confirmed address only
8- Shipping to AK, HI and PR is more. please email for price.
Contact
Operating Hours:
Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)