PLASMA CUTTER 50 Amp Dual Voltage Pilot Arc 200 Amp Tig Welder & Stick Weld

Description

I personally tested this machine and it works Great. Comes with a 1 year warranty on parts and labor. I do any warranty work here at my shop in New Hampshire.
Product description
CAT520DP is an Air Plasma/TIG/MMA 3 in 1 welding machine
CAT520DP is Pilot Arc full new design 3 in 1 machine Plasma cutter/Tig/MMA welder, High quality Fuji IGBT, Lightweight but powerful, The current range for this machine, CUT: 15-50Amps, TIG: 15-200Amps, MMA: 15-200Amps; Post time for the machine can be adjust for CUT and TIG, Auto dual voltage 110/220v (120/240v), Machine can auto indicate the voltage 110 or 220v no need to set anything from panel board, Machine with 2T/4T function, very convenient for TIG welding, The second for post time from 2 to 8 seconds can be adjust, Air pressure fixed in panel easy read the air pressure, The pedal can work with this machine easy.
Input Voltage 110/220±15% (Single phase)
CUT/TIG/MMA Parameter Details:
Rated Input power capacity: 7.8KVA
Rated Input power: 28.7Amps
Input Voltage Frequency: 50/60 Hz
Output Current range: CUT: 10-50Amps TIG: 10-200Amps MMA: 10-200Amps
Rated output voltage: 98V
Duty Cycle (25℃): 60%
No Load loss: 40W
Efficient: 85%
Power Factor: 0.85 cosφ
Arc Starting: HF Pilot Arc Non-Touch
Weight: 17kgs
Air Flow: 80L/min, Air pressure: 0.4Mpa
Max Cutting Thickness: 16mm at 70PSI
Accessories: What's include
1×AG60P Pilot Arc cutting torch with cable
1×TIG torch with consumable
1×Earth clamp with cable
1×Arc holder with cable
1×Air hose
2×Hose clamp
5×tip, 5×electrodes,1×shield cup
1× manual