Trailer Spring Hanger Kit for Double Eye Springs - Single Axle (HK1-D100)

Description

Contains everything you need to attach trailer springs to the frame of your trailer. Front hanger bracket (HG-101) dimensions - 3" length, 2.25" width, 2.06" height with a 9/16" hole located 1.44" from the top of the bracket. Inside width is 1.88". Bracket is made of SAE 1010 - 1018 hot rolled steel. Rear hanger bracket (HG-100) dimensions - 1.5 inch length, 1.5 inch width, 2.25 inch height with a 9/16" hole. Inside width is 1-1/4". Bracket is made of SAE 1010 - 1018 hot rolled steel. Spring shackle links (SHL-102) dimensions - Link has 9/16" holes with 3-1/8" hole centers. Bolts (B-101) 9/16"-18 x 3 inch length. Nuts (N-102) 9/16"-18.
PLEASE NOTE: Hanging an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.
Spring hanger kit for mounting 1-3/4" wide double eye springs to a single axle trailer.
Kit includes (2) front hanger brackets, (2) rear hanger brackets, (4) spring shackle links, (6) spring bolts and (6) lock nuts
Please note: Welding/fabrication is required for install
Raw steel brackets